Close this search box.

REDARC Classic Under Bonnet 25A DC Battery Charger


Vehicle Fitment:
Not Vehicle Specific

In Stock

SKU BCDC1225D BCDC1225D , , Categories: <a href="" rel="tag">Battery & Solar Systems</a>, <a href="" rel="tag">ELECTRONIC ACCESSORIES</a>, <a href="" rel="tag">4x4</a> , , , , , , ,

Share this product

The REDARC BCDC1225D under bonnet Battery Charger is a 12V 25A DC to DC battery charger, capable of high performance in engine bay installations, potted to survive and thrive against heat, water and dust.
Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1225D Classic will charge from both solar and the alternator simultaneously. And, with built-in ‘Green Power Priority’ it will select solar charging first, meaning less load on the alternator.
Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable/smart alternators.
The BCDC1225D features the same patented charging profiles as it’s predecessor along with a new lithium charging profile making the unit suitable for charging AGM, Gel, Standard Lead Acid, Calcium and LiFePO4 batteries.
For most applications, the BCDC1225D is suitable for battery bank sizes of 75-200AH. For higher capacity needs of over 200AH, REDARC recommends the BCDC1240D.
The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%.
Tested in New Zealand for our diverse conditions, the DC to DC battery charger will work in the extreme heat as well as the freezing cold – water, dust and vibration are no match for this charger.
If you’re heading out into the wild and want to get there and back again safely – you can trust REDARC.

– Separate DC and solar charging inputs
– Maximises the performance and life of your auxiliary battery
– Simultaneous DC and solar charging with Green Power Priority
– Suits 12V/24V standard and variable voltage/smart alternators
– Suitable for AGM, GEL, standard lead acid, calcium and Lithium (LiFePO4) batteries
– Suitable for use on vehicles with conventional alternator charging systems

Input Charge: Simultaneous vehicle and solar
Installation: Type In-cabin or under bonnet
Input (Operating) Voltage: 9 – 32VDC
Output System Voltage: 12VDC
Maximum Charging Voltage: 15.3V
Output Current Rating (Cont.): 25A
Input Fuse Rating: 40A
Output Fuse Rating: 40A
Type Approval: E-Mark
Warranty: 2 Years
Standby Current Draw: <8mA
Output Power: 375W
Width (mm): 120
Height (mm): 37
Length (mm): 165
Weight (kg): 1