Close this search box.

Car Builders Peel & Stick Heat Shield Small


Vehicle Fitment:
Not Vehicle Specific

In Stock


Share this product

SIZE: 500mm x 400mm
Car Builders Peel & Stick Heat Shield pressure sensitive adhesive makes these heat shields easy and versatile to install, particularly in tight spaces. It is widely used as a thermal barrier in many industries and works effectively to block heat around fuel tanks/systems, tunnel shields, floor pans, exhaust systems, body shields, transmissions, fluid lines and to protect non ferrous materials. Constructed from a needle punched fibreglass with a polyester core and durable aluminium face that comes in two thicknesses. The product has been oven test for 30 hours with no failure at 475ºF (246ºC)​
– Direct apply to surface being protected, ideal for tight spaces. Can be applied to plastic surfaces e.g. fuel tanks

– Light Weight
– Easily formed into place
– Very effective in limited space
– Approved at several major OEM’s
– Acoustical sound deadening benefits without the squeak or rattle issues of stampings
– Interior or exterior applications
– Easy installation – just peel off the release liner and adhere to surface.

– Fuel tank/system
– Tunnel shields
– Floor pans
– Exhaust systems
– Body shields
– Transmissions
– Steering components
– Fluid lines
– Rubber mounts
– Axle bushings

Technical Specifications
Material Type: Polyester & Fiberglass core material
Temperature: Withstands 246ºC (475ºF) oven test for 30 hours with no failure
Core Thickness: 3mm (0.125 inch)
Foil Thickness: 0.2mm (0.010”)
Weight: 915-1400 g/m (3-4.5 oz/ft2)
Moisture Absorption: 0.3%
Thermal Conductivity 24ºC: 0.036 W/m/ºK
(K-value) 93ºC: 0.043 W/m/ºK
Adhesion To E-Coated Steel 22.1 N/cm after 24hr Dwell
Tensile Strength 526 N/cm2
Tear Resistance 333 N/cm